This cup represent of one hour of my life, the time it took me to turn this standard foam cup into an achievement and one check off the bucket list. I turned this cup inside out, even the rim, which is the hardest part, without putting any kind of hole or crack in it. When I was all done, I put it to the ultimate test, I filled it with fruit punch and not a drip was to be found. That was the most satisfying cup of fruit punch!
Monthly Archives: September 2013
|Refurbished .22 Rifle
Here is a picture of my Dad’s old .22 rifle he had since he was in high school (he’s 58 now). I was sick of seeing it just sit in my closet. I wanted to see it fire, so I took it apart and sprayed it’s inners with some WD 40, then blew out all the residue with an air compressor. Then, I oiled up all of the moving parts inside, like the firing pin and ejector. I also took off the stock and fore-end, stripped them down, re-stained them, and put a few coats of Birchwood Casey gun stock finish. It shoots and looks better than ever. Now all I need to do is get a nice scope.